<html><head><style type="text/css"><!-- DIV {margin:0px;} --></style></head><body><div style="font-family:times new roman,new york,times,serif;font-size:12pt"><div><pre>hey August,<br><br>Yes we are saying the same thing, i was talking about a bonding bushing. <br>The reason I said bonding screw is because the myer hub i use in that scenario<br>only has a screw on it not a lug. The point was to mention that you need<br>to bond your conduits together so there is no interruption from the pvc box.<br><br><br>Drake,<br><br>look ask about the other options for myers hubs at your supply house,<br>because you can buy them with a bonding screw on the lock nut side.<br><br>nick<br><br><br>Hi Nick,<br><br> <br><br>Don't you need to install a bonding bushing with an equipment jumper to bond<br>all conduits together regardless of whether you're using a Meyers hub or not<br>in a non-metallic enclosure? I might be misunderstanding you, but I don't<br>see how a bonding
screw will do any good in a non-metallic enclosure.<br><br> <br><br> <br><br> <br><br>-August<br><br> <br><br>August Goers<br><br>VP, Engineering<br><br> <br><br>Luminalt Energy Corporation<br><br>O: 415.564.7652<br><br>M: 415.559.1525<br><br>F: 650.244.9167<br><br><span><a target="_blank" href="http://www.luminalt.com">www.luminalt.com</a> <</span><a href="http://www.luminalt.com/">http://www.luminalt.com/</a>> <br><br><a href="http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org">august at luminalt.com</a><br><br> <br><br> _____ <br><br>From: <a href="http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org">re-wrenches-bounces at lists.re-wrenches.org</a><br>[mailto:<a href="http://lists.re-wrenches.org/listinfo.cgi/re-wrenches-re-wrenches.org">re-wrenches-bounces at lists.re-wrenches.org</a>] On Behalf Of Nick Vida<br>Sent: Friday, July 24, 2009 1:54 AM<br>To: wrenches<br>Subject: [RE-wrenches] myers
hubs<br><br> <br><br>yes you need a myers hub for the same above the bottom 1/3 and into the top<br>for your non-metalic enclousure. some will use a water tight connector<br>(raintight with a gasket ring). Either way you need a bonding bushing on<br>your connector or a myers hub with the bonding screw on the inside locknut<br>to bond together all the conduits coming into the enclosure.<br>i would suggest a hole saw definitely if you are working with fiberglass<br>combiner box and also for a pvc box because a unibit makes a cloud you dont<br>want around you in fiberglass and makes a beveled hole in a pvc box that can<br>make a seal difficult if your not careful.<br><br>nick<br><br> <br></pre></div></div><br>
</body></html>