We've been using rain-ex on arrays since 1999. we've found it to work very well, most of that was on systems in the Coachella valley (Palm Springs Desert). We provided cleaning free for the first year (once every quarter) then a nominal fee annually. A rain-ex or turtle wax type product is a good investment....<BR><BR><B><I>Joel Davidson <joel.davidson@sbcglobal.net></I></B> wrote:  <BLOCKQUOTE class=replbq style="PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #1010ff 2px solid">Dirt buildup along solar modules' bottom rail is a real problem in locations <BR>that have a lot of airborne dust and dirt and do not get regular rainfall. <BR>Los Angeles gets very little rain from April to November. This year I let <BR>dirt build up on my old array from January until August. One group of <BR>modules is at 10 degrees tilt. The other group is at 18 degrees tilt. Both <BR>groups of modules had the same amount of bottom rail dirt buildup. There was <BR>about 1 inch of
 sun-blocking dirt at the bottom rail, but not up to the cell <BR>tabs, and then uniform dirt on the rest of the modules. See <BR>http://www.solarsolar.com/ I sprayed the array with a very weak solution of <BR>Turtle brand ZipWax car wash, wiped it with a sponge mop, and then rinsed <BR>it. Total time spent cleaning the array was less than 10 minutes. Power <BR>increased 10%. Next summer when I clean the array, I will just dry wipe the <BR>dirt at the module bottom rail and report the difference.<BR><BR>----- Original Message ----- <BR>From: "August Goers" <AUGUST@LUMINALT.COM><BR>To: "'RE-wrenches'" <RE-WRENCHES@LISTS.RE-WRENCHES.ORG><BR>Sent: Tuesday, November 04, 2008 6:43 AM<BR>Subject: [RE-wrenches] Flat Panels<BR><BR><BR>> Wrenches -<BR>><BR>> Lately we've been called out to repair or upgrade several ~5 year old PV<BR>> installations in the Bay Area. It is always interesting to see how they're<BR>> holding up. Apparently it was common to mount panels
 completely flat<BR>> (horizontal) on flat roofs back then. This poses a serious problem because<BR>> the module frame lip catches water and dirt and prevents the panel from<BR>> washing off in the rain. See a photo here:<BR>><BR>> http://luminalt.com/temp/flatpanel.JPG<BR>><BR>><BR>> Note that two of those panels were broken by a baseball, but you can still<BR>> see the dirt buildup on the adjacent panels right across all three rows of<BR>> bypass diodes.<BR>><BR>> Any ideas on what percentage loss that dried dirt is causing?<BR>><BR>> Lesson learned: never tilt panels below 5 degrees, preferably 10 degrees.<BR>><BR>> Cheers,<BR>><BR>><BR>> August Goers<BR>><BR>> Luminalt Energy Corporation<BR>><BR>><BR>> _______________________________________________<BR>> List sponsored by Home Power magazine<BR>><BR>> List Address: RE-wrenches@lists.re-wrenches.org<BR>><BR>> Options &
 settings:<BR>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<BR>><BR>> List-Archive: <BR>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<BR>><BR>> List rules & etiquette:<BR>> www.re-wrenches.org/etiquette.htm<BR>><BR>> Check out participant bios:<BR>> www.members.re-wrenches.org<BR>> <BR><BR>_______________________________________________<BR>List sponsored by Home Power magazine<BR><BR>List Address: RE-wrenches@lists.re-wrenches.org<BR><BR>Options & settings:<BR>http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org<BR><BR>List-Archive: http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org<BR><BR>List rules & etiquette:<BR>www.re-wrenches.org/etiquette.htm<BR><BR>Check out participant bios:<BR>www.members.re-wrenches.org<BR><BR></BLOCKQUOTE><BR>