<DIV style="font-family:Arial, sans-serif; font-size:10pt;"><DIV><BR>I have used the S5! clamps over the years on many different standing seam metal roofs on houses, barns, and out-buildings with good results.  However, I just ordered 40 more for a very remote job and after getting on site I started opening the individual packaging and discovered over half of the S5! blocks were not threaded properly and the bolts to attach the mounting feet would not thread into the blocks.  They all looked like the threading die was either very dull or under-sized, as the threads were not cut deep enough so the bolts would not screw in.   </DIV>
<DIV> </DIV>
<DIV>Of course this is just a minor problem if you are working in a metal shop, but required another long trip back to the site after re-threading the defective ones as I did not have the time to order replacements.  At $4.50 per gallon diesel I did not appreciate this added cost either.</DIV>
<DIV> </DIV>
<DIV>My advice is to open every S5! bag before heading out and make sure the included stainless-steel bolt will easily thread all the way.   Of course, we would not have to deal with this kind of problem if manufacturers actually had a quality control department that was not asleep.</DIV>
<DIV> </DIV>
<DIV>Jeff Yago</DIV><BR> <BR><HR>Netscape.  Just the Net You Need.</DIV>