In a message dated 10/11/2001 2:26:16 PM Pacific Daylight Time, wstahle@slonet.org writes:

Thanks for your shared knoweledge in advance.
Wally Stahle

Small world! Wally, I've run into a similiar probem on an installation I did last year. Initial output good but later test show low output on 4 of five strings. Kyocera may have put out a bad batch of modules. I'm going to do one more field check and then call Kyocera for a remedy. It might be interesting to compare serial numbers.

Don Loweburg

- - - -
To send a message: RE-wrenches@topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch@homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe@topica.com
This email was sent to: michael.welch@homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================