In a message dated 09/19/2001 8:47:15 AM Pacific Daylight Time, joeldavidson@earthlink.net writes:

I changed the PWM on my SW4048 from 129 to 126 the day after Bill Brooks' post.

Joel and Bill,
I just happened to be at one of my grid sites last week and did notice the inverters fan running in sel mode with only about 900w input. Since this procedure was fresh in my mind I made the change. Within 2 minutes the fan turned off.

Seems like a good thing to me. As I have occasion I plan to change the setting on all ETL grid SW systems I maintain.

Don

- - - -
To send a message: RE-wrenches@topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch@homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe@topica.com
This email was sent to: michael.welch@homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================