In a message dated 07/29/2001 7:37:49 PM Pacific Daylight Time,
cvsolar@aol.com writes:

Hi,
Is it just me or is there a real problem removing the knockouts on the
bottom of the new Chinese (Zanthrax) Trace C40 controller? It seems that
there are three points left unpunched instead of two. They were tough
enough
to get out before with two points to rotate on but THREE????

John
CVSolar

John , It is not just you. This is another anoying detail that Xantrex needs
to fix. Those knockouts don't. I usually have to take it all out then use a
reducer if I must use 3/4 fittings.

Don

- - - -
To send a message: RE-wrenches@topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch@homepower.com

==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe@topica.com
This email was sent to: michael.welch@homepower.com

T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================