In a message dated 06/11/2001 10:23:48 PM Pacific Daylight Time,
solarcowboy@yahoo.com writes:
Can anyone contribute a little more to this so I might
be able to better explain this in the future?
Jerry, With the disconnect open and the inverter in flt mode, that piece of
wire was floating (high impedence-no source or load). You were reading the
stray induced voltage which you will get when using a good voltmeter with a
high input impedence-generally 10 meg or so.
Best, Don
- - - -
To send a message: RE-wrenches@topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch@homepower.com
==^================================================================
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9
Or send an email To: RE-wrenches-unsubscribe@topica.com
This email was sent to: michael.welch@homepower.com
T O P I C A -- Register now to manage your mail!
http://www.topica.com/partner/tag02/register
==^================================================================