[RE-wrenches] Stacking SW Series
Ray Walters
ray at solarray.com
Tue Jul 14 20:23:27 PDT 2026
I never liked the original SW5548. It had different firmware and
actually can't surge as much as an SW4048. The 5548 does have a very
heavy transformer, so they would be good for a heavy continuous load
that didn't surge much on startup. They're hard to put up on a wall.
I don't know anything about the SW+, I had switched to Outback back
then. Did you read in the SW+ manual that it could be stacked with
the SW? Unless they designed that into it, I'm guessing they wouldn't
stack.
Ray Walters
Remote Solar
On 7/14/2026 8:01 PM, All Solar via RE-wrenches wrote:
> Has anyone tried to stack an SWPlus 5548 with an SW5548?
> I’m trying to make sure, before I try harder to sell the SWplus
>
>
>
>
> Jeremy Rodriguez
> All Solar Inc.
> Penrose CO
> 719-276-4954
> Established 1998
>
> On Wed, Jul 8, 2026 at 8:27 AM All Solar <allsolarpenrose at gmail.com>
> wrote:
>
> Can anyone tell me if it’s possible to stack an SW Series Inverter
> with an SW Plus Series for 120-240V?
> What’s Required, if So.
>
> Thank You
>
> Jeremy Rodriguez
> All Solar Inc.
> Penrose CO
> 719-276-4954
> Established 1998
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20260714/35966950/attachment.htm>
More information about the RE-wrenches
mailing list