[RE-wrenches] Enphase and Quantum Fiber

[Dave Tedeyan]

Installing a wifi adapter (something like the TP Link AC 750) is very
simple and straightforward. The you just need to run a cable from that to
the Gateway.

Cheers,
Dave

On Sat, Mar 21, 2026, 5:33 PM Tyrone Houck via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Not sure about enphase but most inverters need a 2.4ghz band.. alot of
> time fiber providers install a router that has a 5g/6e or something like
> that.. typically has both bands built in with a firewall that requires
> logging in to the network settings and allowing the device access.
> Alternatively you could install a secondary router or extender to convert
> it to a 2.4. Or a wifi to access point to get the cables connection.. Best
> of luck!
>
>
>
>
> On Sat, Mar 21, 2026, 1:30 PM David Quattro via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Some inverter mfrs require a couple specific router ports to be open, and
>> it sounds like this might not be possible with the Quantum Fiber wireless.
>>
>>
>>
>> On Sat, Mar 21, 2026 at 12:54 PM Solar Energy Solutions via RE-wrenches <
>> re-wrenches at lists.re-wrenches.org> wrote:
>>
>>> We have a client who just installed Quantum Fiber as their Internet
>>> provider. They were successfully able to hook up their TVs and security
>>> cameras without a problem. However, their Enphase gateway would not
>>> connect. After an inordinate amount of time on the phone with Enphase, it
>>> was determined by Enphase that their gateways do not operate with Quantum
>>> Fiber unless hardwired with an  with ethernet cable.  Something about a
>>> mesh system.
>>>
>>> Thoughts?
>>>
>>>
>>> *Andrew Koyaanisqatsi*
>>> President
>>>
>>>
>>> *Solar Energy Solutions, Inc.The BRIGHT CHOICE*
>>>
>>> *Since 1987,** helping you and your *
>>> *Portland neighbors move** towards an environmentally sustainable
>>> future.*
>>>
>>>
>>> *503-238-4502 <503-238-4502>www.SolarEnergyOregon.com
>>> <http://www.solarenergyoregon.com/>*
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> Pay optional member dues here: http://re-wrenches.org
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> There are two list archives for searching. When one doesn't work, try
>>> the other:
>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org
>>>
>>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20260321/e157872a/attachment.htm>