[RE-wrenches] Single Junction box modules

[Tyrone Houck]

Absolutely! Wire management is a crucial consideration too!




On Thu, Sep 4, 2025, 1:29 PM William Miller via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Jay:
>
>
>
> I can’t speak for Tyrone but I hate the half-cut, dual connection-box
> panels.  Here
> <https://millersolar.com/MillerSolar/case_studies/31-Module_leads/Module_leads.html>
> is a web-page I created to explain why they suck.
>
>
>
> William
>
>
>
> Miller Solar
>
> 17395 Oak Road, Atascadero, CA 93422
>
> 805-438-5600
>
> www.millersolar.com
>
> CA Lic. 773985
>
>
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
> Behalf Of *Jay via RE-wrenches
> *Sent:* Thursday, September 4, 2025 11:44 AM
> *To:* RE-wrenches
> *Cc:* Jay
> *Subject:* Re: [RE-wrenches] Single Junction box modules
>
>
>
> Why are you against the split cell panels?
>
>
>
> Jay
>
>
>
> On Sep 4, 2025, at 12:36 PM, Tyrone Houck via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
> 
>
> Greetings wrenches,
>
> I am looking for recommendations for modules around the 400w ish range..
>
> Ideally 42" wide or less with a single j box.
>
> What new mods are you guys installing?
>
> Historically we've used LG and Silfab. Any suggestions would
> be appreciated. I can't imagine we're the only ones resistant to the new
> common sizes/split cell options. Thank you in advance.
>
> Sunny Regards,
>
>
>
> Tyrone Houck
>
> Oregon Solarworks LLC
>
> CCB #204937 LRT #076
>
> 541-787-1366
>
> tyrone at oregonsolarworks.com
>
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250904/8712ed6e/attachment.htm>