[RE-wrenches] EG4 v HomeGrid battery systems update?
jay
jay.peltz at gmail.com
Tue Sep 2 08:40:38 PDT 2025
A few thoughts about the HG
They are a 48v not a 51.2v battery so if you ever need to add, you’ll have to find the non standard 48v battery.
I’m curious about the lack of a breaker/disconnect. Didn’t we go through this earlier in a thread that there needs to be a lockable DC disconnect between the battery and the inverter? Not for RS but just the need for a disconnect?
I do like how big you can make one stack.
My preference these days is to go with same OEM for both battery and inverter.
Currently thats EG4, Fortress, Midnite as best I can remember.
jay
> On Sep 2, 2025, at 8:40 AM, Christopher Warfel via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>
> Hi Wrenches, I went through the archives and read the comparison between these two. The HomeGrid manual was in such a mess (or my pdf reader was defunct), that I started looking at other options. If anyone has a strong opinion of either of these two, or something better, I would appreciate. We traditionally install small systems, and this would be one (@15kWh). I would prefer to use a racking system with the BMS as part of the packaging. Solark 12kPV multimode. Thank you, Chris
>
> --
> Christopher Warfel, PE
> ENTECH Engineering, Inc.
> PO Box 871, Block Island, RI 02807
> (401) 447-5773
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list