[RE-wrenches] EG4 Wallmount Parallel Busbars

[jay]

So you’re looking for 9 connections pos/neg

1 for each battery and 2 for each inverter?



> On Aug 18, 2025, at 8:41 AM, Jason Szumlanski via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> I'm looking for suggestions for a fused busbar for five Wallmount batteries with two FlexBoss18 inverters. I was thinking Victron Lynx Distributor, but I don't think I can fit that into one of the EG4 Conduit Boxes. I'm looking for the most elegant solution possible without adding an extra enclosure, if possible.
> 
> 
> Jason Szumlanski
> Florida Solar Design Group
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250818/1019cf73/attachment.htm>