[RE-wrenches] removing old abosolyte cells.
Chris Schaefer
chris at solarandwindfx.com
Thu Jul 17 13:22:58 PDT 2025
Hey Jay,
Does this look like what you are dealing with?
Christopher
On Thu, Jul 17, 2025 at 4:14 PM jay via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> I’ll give that some thought.
>
> It’s too steep and narrow but it’s not too far to the road which maybe I
> could just pull them with the nearby tractor and a long rope.
>
> thanks
>
>
> On Jul 17, 2025, at 1:38 PM, david quattro <david at quattrosolar.com> wrote:
>
> If it’s not too steep you can continually leapfrog two or 3 pieces of
> plywood, and roll your engine dolly on that. Or you can use a few cuts of
> large diameter pipe as rollers.
>
>
>
> On Thu, Jul 17, 2025 at 3:33 PM jay via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> I was out at the job site today with the customer with the old SI 4548.
>> It’s going away, primarily because she wants a mini split and her
>> inverter is too small at this point.
>>
>> She has of course a abosolyte battery, 6 cells per stack.
>> I don’t know if they will slide out or not.
>>
>> But just thought I’d ask if anyone has any tricks.
>> Oh and no it’s in a side room, no way to get any heavy equipment in
>> there, and each stack is about 600#
>>
>> Maybe I could get an engine hoist in there, but outside the door is dirt
>> and gravel and its a long ways to where I can put the trailer.
>> I am anticipating having to remove the cells to deal with it.
>> Cutting it apart with a right angle grinder is about the only trick I
>> know. But I’m guessing there are others.
>>
>> Fortunately I can install the new equipment on the other wall so I don’t
>> need to get the batteries out quickly.
>>
>> thanks in advance
>>
>> jay
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
--
Chris Schaefer’s
*Tel 585-229-2083 or Cell 585-748-1870 *
*5115 S Hill Road ~ Canandaigua New York 14424**www.solarandwindfx.com
<http://www.solarandwindfx.com> ~ E-mail: chris at solarandwindfx.com
<chris at solarandwindfx.com>*
Thomas Jefferson, the author of our great Constitution, once said,
"democracy" will cease to exist when you take away from those who are
willing to work and give to those who would not."
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250717/1dfe7d87/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20161129_115628.jpg
Type: image/jpeg
Size: 111634 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250717/1dfe7d87/attachment-0001.jpg>
More information about the RE-wrenches
mailing list