[RE-wrenches] Combining two PowerFlo16 to single Midnite AIO

[Kent]

Jason,

Is there room to double up cables inside the AIO? Two equal length sets 
of battery cables between the batteries and the AIO should work.

Kent Osterberg
Blue Mountain Solar


On 7/16/2025 12:52 PM, Jason Szumlanski via RE-wrenches wrote:
> What is the most elegant way to combine two of the Powerflo16 
> batteries when using a single AIO?
>
> The manual doesn't require fusing when paralleling 3 or fewer 
> batteries. I was thinking about a Victron Lynx Distributor inside an 
> enclosure, but that enclosure would have to be quite large to 
> accommodate all of that (four 2/0 in, two 4/0 out), and since fuses 
> aren't required, standard busbars would probably be much smaller and 
> simpler. I like how the EG4 batteries have a matching conduit box and 
> parallel bussing is integrated. I want something equally elegant for 
> the PowerFlo16. It's too bad we can't parallel right at the battery 
> terminals.
>
>
> Jason Szumlanski
> Florida Solar Design Group
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250716/6b901025/attachment.htm>