[RE-wrenches] generic and simple AC transfer switch
Jerry Shafer
jerrysgarage01 at gmail.com
Sat Mar 1 11:38:13 PST 2025
Kohler makes ATS's that l use for A/C coupled battery back up systems
On Sat, Mar 1, 2025, 8:42 AM Lou Russo via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> If you don't need a UL listed unit you just use Generac Part
> number 0L2911. We have not used it in the field but we did test in the shop
> and did the job. Mount it in a Hoffman type box on a backplane and off you
> go.
>
> William, that RDT unit looks nice, could you email me the manual as
> well, off-list ? Thank you.
>
> Aloha,
>
> Lou Russo
> Owner
> lou at spreesolarsystems.com
> Office - 808 345 6762
> Spree Solar Systems LLC
> CT-34322
>
>
>
> On Sat, Mar 1, 2025 at 6:32 AM Kirk Herander via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Hi,
>>
>> Yes and thanks! Please email off-list.
>>
>> *Kirk Herander / **kirkh at vermont.solar <kirkh at vermont.solar>*
>>
>> *Owner|Principal, VT Solar, LLC*
>>
>> *Celebrating our 34st Anniversary 1991-2025!!*
>>
>> dba Vermont Solar Engineering
>>
>> 802.559.1225
>>
>>
>> On Sat, Mar 1, 2025 at 11:22 AM William Miller via RE-wrenches <
>> re-wrenches at lists.re-wrenches.org> wrote:
>>
>>> Kirk:
>>>
>>> I recently installed a Kohler RDT transfer switch that does exactly what
>>> you specified. The RDT is an AC-Seeking ATS. There is an option to create a
>>> contact closure upon failure of the primary AC input.
>>>
>>> Even though the device is Kohler branded it has no proprietary
>>> connections to the genset- it is generator agnostic.
>>>
>>> The unit comes in several standard sizes. It can be ordered as service
>>> equipment and with or without on-board distribution. It’s a nice piece of
>>> kit.
>>>
>>> I can send the manual if you’d like.
>>>
>>> William Miller
>>> Miller Solar.com
>>> 805-438-5600
>>> www.millersolar.com
>>>
>>>
>>> On Sat, Mar 1, 2025 at 7:03 AM Kirk Herander via RE-wrenches <
>>> re-wrenches at lists.re-wrenches.org> wrote:
>>>
>>>> Hello All,
>>>>
>>>> I am looking for a non-generator brand specific 100A ATS to switch to
>>>> secondary power when the utility goes out, period. IMO this means the
>>>> contactor coil would have to be controlled
>>>> by the utility AC, either 120 or 240,. If utility fails, the contactor
>>>> switches to N/C secondary power. No outside control signals required.
>>>> Thanks in advance.
>>>>
>>>> --
>>>>
>>>> *Kirk Herander / **kirkh at vermont.solar <kirkh at vermont.solar>*
>>>>
>>>> *Owner|Principal, VT Solar, LLC*
>>>>
>>>> *Celebrating our 34st Anniversary 1991-2025!!*
>>>>
>>>> dba Vermont Solar Engineering
>>>>
>>>> 802.559.1225
>>>> _______________________________________________
>>>> List sponsored by Redwood Alliance
>>>>
>>>> Pay optional member dues here: http://re-wrenches.org
>>>>
>>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>>
>>>> Change listserver email address & settings:
>>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>>
>>>> There are two list archives for searching. When one doesn't work, try
>>>> the other:
>>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>>
>>>> List rules & etiquette:
>>>> http://www.re-wrenches.org/etiquette.htm
>>>>
>>>> Check out or update participant bios:
>>>> http://www.members.re-wrenches.org
>>>>
>>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> Pay optional member dues here: http://re-wrenches.org
>>>
>>> List Address: RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> There are two list archives for searching. When one doesn't work, try
>>> the other:
>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org
>>>
>>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250301/2eec058f/attachment.htm>
More information about the RE-wrenches
mailing list