[RE-wrenches] generic and simple AC transfer switch

Kirk Herander kirkh at vermont.solar
Sat Mar 1 08:31:29 PST 2025


Hi,

Yes and thanks! Please email off-list.

*Kirk Herander / **kirkh at vermont.solar <kirkh at vermont.solar>*

*Owner|Principal, VT Solar, LLC*

*Celebrating our 34st Anniversary 1991-2025!!*

dba Vermont Solar Engineering

802.559.1225


On Sat, Mar 1, 2025 at 11:22 AM William Miller via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Kirk:
>
> I recently installed a Kohler RDT transfer switch that does exactly what
> you specified. The RDT is an AC-Seeking ATS. There is an option to create a
> contact closure upon failure of the primary AC input.
>
> Even though the device is Kohler branded it has no proprietary connections
> to the genset- it is generator agnostic.
>
> The unit comes in several standard sizes. It can be ordered as service
> equipment and with or without on-board distribution. It’s a nice piece of
> kit.
>
> I can send the manual if you’d like.
>
> William Miller
> Miller Solar.com
> 805-438-5600
> www.millersolar.com
>
>
> On Sat, Mar 1, 2025 at 7:03 AM Kirk Herander via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Hello All,
>>
>> I am looking for a non-generator brand specific 100A  ATS to switch to
>> secondary power when the utility goes out, period. IMO this means the
>> contactor coil would have to be controlled
>> by the utility AC, either 120 or 240,. If utility fails, the contactor
>> switches to N/C secondary power. No outside control signals required.
>> Thanks in advance.
>>
>> --
>>
>> *Kirk Herander / **kirkh at vermont.solar <kirkh at vermont.solar>*
>>
>> *Owner|Principal, VT Solar, LLC*
>>
>> *Celebrating our 34st Anniversary 1991-2025!!*
>>
>> dba Vermont Solar Engineering
>>
>> 802.559.1225
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250301/eccc7061/attachment.htm>


More information about the RE-wrenches mailing list