[RE-wrenches] Solar Edge system not working after Tesla installation

[Dave Tedeyan]

Hi all,

I am going to be checking out a site next week where there is an old Solar
Edge system not producing. It stopped working when someone installed a
Tesla battery system. I was not part of either installation, but am being
called in to get the solar working again. Supposedly the Tesla installer
has been back a couple times and could not figure it out. I am guessing
that the SolarEdge inverter is the one before the HD Wave, so maybe a
SE11400A inverter.

I am not a Tesla installer, and not familiar with their equipment. Assuming
there are no dumb installation mistakes, does anyone know whether there are
any programming nuances that might affect the AC coupling? Or anything else
that I maybe should be looking for when troubleshooting this one?

Thanks!
-Dave

-- 

[image: Logo] <https://www.sungineersolar.com/>
Dave Tedeyan, P.E.
Owner | Sungineer Solar
p: he | him | his
a: 1653 Slaterville Rd. | Ithaca, NY 14850
w: www.sungineersolar.com <http://www.sungineersolar.com/>
c: (607) 270-0370
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250123/f715bcdc/attachment.htm>