[RE-wrenches] 120-240 Transformer loud vibration and humming.
John Blittersdorf
john.blittersdorf at gmail.com
Wed Jan 22 19:31:08 PST 2025
Christopher,
Update on the Transformer Humming. Installed a new PSX-240 from Kirk and
it is LOUDER than the T-240 that I took out.
I have a call into the well driller to see if they have a record of the
pump size or other details. When connected
directly to the grid via transfer switch, still loud noise... same with
battery only. I did not check the 120VAC 30 amp break
in the backed up loads sub panel. All other wiring was redone as I switched
the pump directly to the grid until I received the
new transformer and back to the inverter again. so all the connections were
redone except the 120 breaker.
John
On Wed, Jan 22, 2025 at 10:30 AM Howie Michaelson via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:
> John,
> If you need a T240 (internal or external), I have a few used ones (and
> maybe a new one) in storage.
> Howie
>
>
> On Wed, Jan 22, 2025, 10:14 AM Christopher Warfel via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> I could be a loose electrical or mechanical connection. It's been
>> installed for a while and connections could have loosened up from
>> expansion and contraction.
>>
>> On 1/18/2025 9:06 AM, John Blittersdorf via RE-wrenches wrote:
>> > Hi Wrenches,
>> > I have a customer with an SW4024 installed in 2003 with the Trace
>> > T220 transformer for
>> > her well pump. Recently it has started making a lot of noise when the
>> > well pump comes on.
>> > I checked the current on the well pump and it seems to be in the
>> > normal range. I have never had a transformer failure. Could this be a
>> > failing transformer?
>> >
>> > Also, I have not been able to source a new one (Outback T240). Are
>> > there other brands
>> > some of you may have used for a step up transformer?
>> >
>> > John Blittersdorf
>> >
>> > _______________________________________________
>> > List sponsored by Redwood Alliance
>> >
>> > Pay optional member dues here: http://re-wrenches.org
>> >
>> > List Address: RE-wrenches at lists.re-wrenches.org
>> >
>> > Change listserver email address & settings:
>> > http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> >
>> > There are two list archives for searching. When one doesn't work, try
>> the other:
>> > https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> > http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> >
>> > List rules & etiquette:
>> > http://www.re-wrenches.org/etiquette.htm
>> >
>> > Check out or update participant bios:
>> > http://www.members.re-wrenches.org
>> >
>> --
>> Christopher Warfel, PE
>> ENTECH Engineering, Inc.
>> PO Box 871, Block Island, RI 02807
>> (401) 447-5773
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20250122/c483f847/attachment.htm>
More information about the RE-wrenches
mailing list