[RE-wrenches] XWPro and SCP

[William Miller]

Jay:

I just configured  a new XW Pro with an old SCP.

William Miller
Miller Solar.com
805-438-5600
www.millersolar.com


On Mon, Nov 11, 2024 at 2:23 PM jay via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

>
> I know this has been discussed before but I couldn’t find what I needed in
> archives.
>
> If I have a single XWpro with 600v controller and all i want to do is some
> programing can I use the SCP?
> I just remember there were things the SCP can’t so with the PRO, but I
> think its in the stacking part and not basic programing, but again, not
> sure.
>
> Or do I need to use the gateway.
>
> thanks
>
> jay
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20241111/36adf0d2/attachment.htm>