[RE-wrenches] Sol-Ark Gen Input

[rick at solshineenergy.com]

Back on the Sol-Ark topic again. We have a customer whose 12kW is measuring -195VDC to ground from L1 and L2 with the Gen breaker open. L1 to L2 = 0V. I know the Gen input can be configured as an output, but reading a high DC voltage to ground is concerning. The generator has never been run. System is operating normally. 

Anyone have a Sol-Ark accessible that could verify what they’re reading?

Thanks in advance. 

Rick Brown
Solshine Energy 
Solar Electric Contracting Services 
www.solshineenergy.com
Roanoke, VA
Office: 540.235.3095
Mobile: 540.808.9502
CONFIDENTIALITY NOTICE -- This email is intended only for the person(s) named in

the message header. Unless otherwise indicated, it contains information that is

confidential, privileged and/or exempt from disclosure under applicable law. If you have

received this message in error, please notify the sender of the error and delete the

message. Thank you.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20241015/c9db658c/attachment.htm>