[RE-wrenches] favortie micro inverters?

August Goers august at luminalt.com
Wed Sep 25 11:00:56 PDT 2024


I've noticed that the Enphase compatibility calculator needs some work - it
called out microinverters as being compatible when clearly the operating
voltages or currents were outside of the ranges listed on the spec sheet.
Need to double check all of the voltage and currents at both high and low
ranges with the appropriate temperature corrections applied to make sure
they work! And, good point about modules losing a bit of max current and
voltage as they age.

August


On Wed, Sep 25, 2024 at 8:43 AM Jesse Dahl via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> I like enphase too. I live in northern MN and we see cold temps of -40 F
> in the winter and they hold up.
>
> Sent from my iPhone
>
> On Sep 23, 2024, at 10:09 PM, david quattro via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
> 
> I used Chilicon on a couple installs, and Enphase is far better.
>
>
>
>
>
> On Mon, Sep 23, 2024 at 9:05 PM greg egan via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Good intel.  I believe their micros are rated to -40C/F.  If they quit
>> working at that temp it would be okay as long as they start back up when
>> if warms up.  Normally when it's that cold the sun is pretty scarce at
>> this latitude.
>>
>> Greg Egan
>> Remote Power Inc.
>> Fairbanks, AK
>>
>> On 9/23/2024 7:47 PM, MDElectricSolar wrote:
>> > Been around forever, good tech support, the products have been improved
>> and refined, easy to install, good monitoring platform. Not sure how they
>> would fare in Alaskan winters though…
>> >
>> > Maybe an sma installed indoors?
>> >
>> > Michael D Nelson
>> > MD Electric & Solar, Inc.
>> > 707-684-0064 mobile
>> > 707-884-1862 office
>> > www.mdelectricsolar.com
>> > www.facebook.com/mdelectricandsolar
>> >
>> >
>> >> On Sep 23, 2024, at 8:41 PM, greg egan <greg at remotepowerinc.com>
>> wrote:
>> >>
>> >> Michael, thank you.  Any particular reason you like them best?
>> >>
>> >>
>> >> Greg Egan
>> >> Remote Power Inc.
>> >> Fairbanks, AK
>> >>
>> >>> On 9/23/2024 7:29 PM, MDElectricSolar wrote:
>> >>> Enphase…
>> >>>
>> >>> Michael D Nelson
>> >>> MD Electric & Solar, Inc.
>> >>> 707-684-0064 mobile
>> >>> 707-884-1862 office
>> >>> www.mdelectricsolar.com
>> >>> www.facebook.com/mdelectricandsolar
>> >>>
>> >>>
>> >>>>> On Sep 23, 2024, at 7:30 PM, greg egan via RE-wrenches <
>> re-wrenches at lists.re-wrenches.org> wrote:
>> >>>> Esteemed wrenches,
>> >>>>
>> >>>> Have a client that is grid connected (not my usual client) and
>> looking to do solar without back up.  Has shading issues so I'm thinking
>> micros would work best for this application, plus take care of rapid shut
>> down without needing extra devices/wiring.  Problem is I have not ever
>> installed micros.
>> >>>>
>> >>>> Any recommendations on brands /models that have been reliable?
>> Decent tech support?  Customer just wants something that works and is
>> relatively simple to navigate the online monitoring.  Probably 4-5 kW so
>> not a huge system.
>> >>>>
>> >>>> Thanks in advance, I appreciate it!
>> >>>>
>> >>>> Greg Egan
>> >>>> Remote Power Inc.
>> >>>> Fairbanks, AK
>> >>>> _______________________________________________
>> >>>> List sponsored by Redwood Alliance
>> >>>>
>> >>>> Pay optional member dues here: http://re-wrenches.org
>> >>>>
>> >>>> List Address: RE-wrenches at lists.re-wrenches.org
>> >>>>
>> >>>> Change listserver email address & settings:
>> >>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>> >>>>
>> >>>> There are two list archives for searching. When one doesn't work,
>> try the other:
>> >>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> >>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>> >>>>
>> >>>> List rules & etiquette:
>> >>>> http://www.re-wrenches.org/etiquette.htm
>> >>>>
>> >>>> Check out or update participant bios:
>> >>>> http://www.members.re-wrenches.org
>> >>>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240925/e6d28cf8/attachment.htm>


More information about the RE-wrenches mailing list