[RE-wrenches] Another Mate 3 programming issues

[Christopher Warfel]

I saw the NA and was?  This has been a problem since I took over the 
system.  I was hired to maintain as the owner is a retired ship mechanic 
and is very risk adverse. So, in any case, this was how it looked at 
least two years ago, when I started working for him.

There is an active light on the Hub

I did replace the cable to no avail.

I am pretty sure this is the original CC, so it could be as was 
mentioned earlier; a problem that cannot be fixed due to the processor 
difference.


Thank you to everyone, I will continue going through the responses.  Chris


On 7/19/2024 12:30 PM, jay wrote:
> HI Chris,
>
> Can you give us more data?
>
> Like is this a new problem, or it only started after X?
>
> Since its not seeing the port ( NA) it could be the CC or the HUB, or 
> the cable.
> the hub will show an active LED light if its connecting to anything on 
> that port.
>
> You can try plugging into the CC directly to see if it reads it, 
> probably easier with another mate.
>
> It just sucks to not have tech support or anyone on wrenches from some 
> OEMS
>
> Jay
>
>
>
>> On Jul 19, 2024, at 10:13 AM, Christopher Warfel via RE-wrenches 
>> <re-wrenches at lists.re-wrenches.org> wrote:
>>
>> This is grid tied system with all firmware updates that the Mate 3s 
>> recognizes. I cannot figure this blank data menu out.  I have to 
>> program the battery ABS, FLOAT settings from the FM60 CC.  System is 
>> 12 years old so no Tech support available even if they answer the 
>> phone....
>>
>> Has anyone have advice for if this is normal, or if there seems to be 
>> an issue? Used a spare Mate 3s with no difference.  Thank you, Chris
>>
>>
>>
>>
>> -- 
>> Christopher Warfel
>>           ENTECH Engineering Inc.
>>    PO Box 871, Block Island, RI 02807
>>                   401-477-5773
>> <EEIlogolong.jpg> <https://entech-engineering.com/Home/default.php>
>>
>> <Mate3s Battery Setpoint 
>> Menu.jpg><cwarfel.vcf>_______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try 
>> the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>
-- 
Christopher Warfel
           ENTECH Engineering Inc.
    PO Box 871, Block Island, RI 02807
                   401-477-5773
EE Logo <https://entech-engineering.com/Home/default.php>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240721/eab16add/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EEIlogolong.jpg
Type: image/jpeg
Size: 17117 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240721/eab16add/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cwarfel.vcf
Type: text/vcard
Size: 203 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240721/eab16add/attachment.vcf>