[RE-wrenches] Outback in general

[Dana Orzel]

What’s up with Outback as a biz?
Are they back? 
Status?
phone #s same?

Dana Orzel - dana at solarwork.com - 208.721.7003

> On Jul 19, 2024, at 5:19 PM, Jim Gowdy via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> 
> I'm somewhat new to the solar industry and I'm starting to break into programming and more computer involved skills of solar.  I primarily do small cabins and service work, but have been a part of some decent residential systems.  Does anyone have any good literature and/or videos of updating firmware on Outback Mate3 controllers.  I've seen instructions, but I hear little tricks/tips that are not at all in the instructions.  I'm looking for a really good, detailed instruction sheet so I can keep it for reference.  Thanks for any responses.  
> 
> --
> Jim with Gowdy Electric
> Cambria, Ca 93428
> business  805 927 2630
> cell  805 975 5279
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>