[RE-wrenches] Mate 3 programming issues

[Jim Gowdy]

Thanks for input, I ended up getting it with William Miller's help.  On the
"sign in" on the Mate3, I ended up leaving the user number (132) and put a
specific 4 digit number in the "installer" portion which got me access to
more settings.

On this system there are 4 x FXR inverters, AC and DC cabinetry, fndc
monitor, 1 x FM100 CC, with flooded lead acid batteries.  Also a backup
generator

On Thu, Jul 18, 2024 at 4:03 PM Nick Lucchese via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> I know this might be a silly question but did you try unplugging the Cat5
> cable to the Hub for a few seconds then plug back in? Update firmware with
> newest Mate3 (not 3-s)? I had a reasonable amount of Mate3 swaps to the
> newer 3-s but the Mate3 units I still serve are pretty reliable and the
> behavior you describe kind of sounds like those usually remedied with a
> quick removal of the Cat5 cable.
>
> Good luck, Nick
>
>
> On Thu, Jul 18, 2024 at 2:12 PM Jim Gowdy via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> I'm having issues trying to set this Mate 3 controller to default
>> settings on a system I haven't worked on before.  Things I'm noticing is
>> under my MAIN MENU-SETTINGS-INVERTER my only choice is "SEARCH" and no
>> other menu options.  Also under MAIN MENU-SETTINGS-MATE3s my only choices
>> are AGS, data logging, flextime schedule, and optics auto reboot interval.
>> I've done some research online and it seems like user options have been
>> limited.  I've got a call into tech support, but no response yet.  Does
>> anyone have any advice?
>>
>> --
>> Jim with Gowdy Electric
>> Cambria, Ca 93428
>> business  805 927 2630
>> cell  805 975 5279
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>

-- 
Jim with Gowdy Electric
Cambria, Ca 93428
business  805 927 2630
cell  805 975 5279
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240718/df30936f/attachment.htm>