[RE-wrenches] Xantrex XW6048 HOT!

Dave Angelini Offgrid Solar offgridsolar at sti.net
Thu Jun 13 08:26:24 PDT 2024


Disco 250A breaker on bad XW and remove its xanbus RJ45. Assume the bad 
one is not the master?

Dave Angelini Offgrid Solar
"we go where powerlines don't"
    [1]https://offgridsolar1.com/ [2]  [1]
e-mail  offgridsolar at sti.net
text 209 813 0060

On 2024-06-13 8:01 am, Jason Szumlanski via RE-wrenches wrote:

> I'm looking at an off-grid quad inverter setup for a client, not my 
> installation. One of the stacked.inverters is extremely hot, sometimes 
> it goes into F66 and takes down the adjacent inverters with it to F66 
> probably because of these Xanbus network is broken.
> 
> I disabled charging and discharging on the inverter that is getting 
> hot, but it's still remains very hot. Any ideas?
> 
> I tried to put that one inverter in standby, but the generator will not 
> sync with the remaining three and charge the batteries. So I have to 
> leave it in normal operating mode for the moment.
> 
> Jason Szumlanski
> Florida Solar Design Group
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try 
> the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org


Links:
------
[1] http://members.sti.net/offgridsolar/
[2] https://offgridsolar1.com/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240613/77be8290/attachment.htm>


More information about the RE-wrenches mailing list