[RE-wrenches] Water system with Grundfos SQFlex

[jay]

Hi Brad,

Here is the  link.

https://www.supplyhouse.com/Boshart-SSMAXL-100-1-Stainless-Steel-Male-Insert-Adapter-Extra-Long?utm_source=google_ad&utm_medium=shopping_neutral&utm_campaign=Shopping_Neutral_New_users&gad_source=1&gclid=Cj0KCQjwu8uyBhC6ARIsAKwBGpQPie_fqna9Gi5uV3xJmRp-HuZVqG0d3rDUmMZSAikrkFZIrHRnqCQaAuZyEALw_wcB <https://www.supplyhouse.com/Boshart-SSMAXL-100-1-Stainless-Steel-Male-Insert-Adapter-Extra-Long?utm_source=google_ad&utm_medium=shopping_neutral&utm_campaign=Shopping_Neutral_New_users&gad_source=1&gclid=Cj0KCQjwu8uyBhC6ARIsAKwBGpQPie_fqna9Gi5uV3xJmRp-HuZVqG0d3rDUmMZSAikrkFZIrHRnqCQaAuZyEALw_wcB>

I’ve installed dozens of wells and dozens of hydros at high pressure using these.
Multiple clamps per connector and I’ve had no leaks.
Also while it doesn’t seem right, using teflon tape on the barbs actually helps to reduce leaks.

Install the clamps at 120 or 180 degrees from each other is important.  

If you want to do it correctly then use a HDPE butt welding machine.  I just never could afford one.

Jay





> On May 26, 2024, at 12:54 PM, Bradley Bassett via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
> 
> Just went through all of Supplyhouse and did not find anything suitable. Off to do some looking down the well...
> 
> On Sun, May 26, 2024 at 11:44 AM Dana Orzel via RE-wrenches <re-wrenches at lists.re-wrenches.org <mailto:re-wrenches at lists.re-wrenches.org>> wrote:
> Brad – Try supplyhouse.com <http://supplyhouse.com/>
> 888.757.4774
> 
>  
> 
> _________________________________________________________
> 
> Dana Orzel                GREAT SOLAR WORKS!                     
> 
> C – 208.721.7003      E – dana at solarwork.com <mailto:dana at solarwork.com>
> W - www. greatsolarworks.com <http://greatsolarworks.com/>     www.solarwork.com <http://www.solarwork.com/>
> “Responsible Technologies for Responsible People since 1988!”
> 
>  
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org <http://re-wrenches.org/>
> 
> List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org>
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org>
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/ <https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/>
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org>
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm>
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org <http://www.members.re-wrenches.org/>
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> Pay optional member dues here: http://re-wrenches.org
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
> 
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> http://www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240526/9db2ecd0/attachment.htm>