[RE-wrenches] Off-grid array far, far from the batteries

Roy Butler roy at four-winds-energy.com
Wed Apr 10 11:20:23 PDT 2024


The Morningstar Tristar MPPT600 60 amp charge controller will accept a 
PV input voltage up to 425 volts.
Above that the controller begins to current limit and that goes to zero 
above 550 volts.

Roy Butler
Four Winds Renewable Energy, LLC
8902 Route 46, Arkport, NY 14807
607-324-9747www.four-winds-energy.com

Education is when you read the fine print; experience is what you get when you don’t.

“The less people know, the more stubbornly they know it.”

Although no trees were killed in the sending of this message,
a large number of electrons were terribly inconvenienced.

                 

On 4/10/2024 2:08 PM, Dana Orzel via RE-wrenches wrote:
> I am out of country at the moment, but I think Morningstar has a 600 V 
> controller that’s pretty good sized I can’t give you much spec on it, 
> but you could do the DC run at up to 600 V
> Dana Orzel
> C: 208.721.7003
> E- dana at solarwork.com
>
>> On Apr 10, 2024, at 6:57 PM, Nick A Lucchese via RE-wrenches 
>> <re-wrenches at lists.re-wrenches.org> wrote:
>>
>>  Pretty cold up there in Montana! Maybe only 10 or 11 in series 
>> depending on the module?
>>
>> Nick
>>
>>
>>
>>
>>> On Apr 10, 2024, at 9:40 AM, Chris Daum via RE-wrenches 
>>> <re-wrenches at lists.re-wrenches.org> wrote:
>>>
>>> The crazy things folks do.Dear people:We have a fellow who has an 
>>> initial off-grid array with a Radian 8048A (and related e-panel, 
>>> etc.) and six 410W Canadian solar modules.He has six more of the 
>>> same modules…but the ideal site for solar is 900 feet away from his 
>>> batteries and the rest of the system.Yeah, good planning, right?
>>> In terms of getting AC power out of his ‘new’ 6X array, Enphase 
>>> won’t work since he doesn’t have an Enphase system.We’re looking at 
>>> perhaps SMA or Chilcon (so the size of the wire run won’t be so 
>>> astronomical).Any suggestions?
>>> Best,
>>> Chris Daum
>>> Oasis Montana Inc.
>>> 406-777-4309 or 4321
>>> 406-777-4309 fax
>>> www.oasismontana.com <http://www.oasismontana.com/>
>>> _______________________________________________
>>> List sponsored by Redwood Alliance
>>>
>>> Pay optional member dues here:http://re-wrenches.org
>>>
>>> List Address:RE-wrenches at lists.re-wrenches.org
>>>
>>> Change listserver email address & settings:
>>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>>
>>> There are two list archives for searching. When one doesn't work, 
>>> try the other:
>>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>>
>>> List rules & etiquette:
>>> http://www.re-wrenches.org/etiquette.htm
>>>
>>> Check out or update participant bios:
>>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try 
>> the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20240410/c444c9c0/attachment.htm>


More information about the RE-wrenches mailing list