[RE-wrenches] XW EQ question

[Ray Walters]

What's funny, is the good old SWs from the Trace days had the same 
problem.   Never could get them to equalize.  Maybe that software 
carried over.

Ray Walters
Remote Solar

On 2/12/2024 4:42 PM, jay via RE-wrenches wrote:
> Hi Kevin
>
> Thanks, I heard that exact thing from someone else.
>
> Do you know if the CC are connected via Xanbus, does that also prevent EQ in the CC?
>
> Jay
>
>> On Feb 12, 2024, at 4:36 PM, Kevin Pegg via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>>
>> I have seen the same behaviour on a few older XW6048's as well - including my own. It will go into EQ mode after completion of Absorb charge, but voltage does not increase as programmed. Adjusting the absorb settings manually is a clumsy workaround. I assumed it's a software bug.
>>
>> Kevin
>>
>> -----Original Message-----
>> From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> On Behalf Of jay via RE-wrenches
>> Sent: February-12-24 11:36 AM
>> To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
>> Cc: jay <jay.peltz at gmail.com>
>> Subject: [RE-wrenches] XW EQ question
>>
>> HI All,
>>
>> I have a client with an older XW 6048 with 2 x XW-60 controllers, SCP etc.
>>
>> He can’t seem to get the EQ to work with either equipment.
>>
>> Its set to 62.4v for Rolls flooded batteries, but it won’t go above 60v.
>>
>> It is charging normally to just at 60v so its not a temp sensor failure.
>>
>> Any thoughts?
>>
>> thanks
>>
>> jay
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>