[RE-wrenches] Fronius USA available 2023 & 2024 ?
Mark Downing
mark at hurshtown.com
Fri Sep 1 08:47:57 PDT 2023
I have zero experience with Growatt string inverters, only off-grid, and have only dealt with dissatisfied customers.
Each inverter requires a separate transformer if you want split phase 240v.
They also seem a bit wimpy on big loads.
But then again - my opinion is worth every penny you have paid for it.
________________________________
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of Drake Chamberlin via RE-wrenches <re-wrenches at lists.re-wrenches.org>
Sent: Friday, September 1, 2023 9:55 AM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Cc: drake.chamberlin at redwoodalliance.org <drake.chamberlin at redwoodalliance.org>
Subject: Re: [RE-wrenches] Fronius USA available 2023 & 2024 ?
My suppliers don't have any Fronius now. I try to buy entire systems, if possible. What is now available for a string inverter is the Grow Watt. Can anyone either recommend them, or warn us not to use them.
Thanks,
Drake
Drake Chamberlin
Athens Electric LLC
Ohio Electrical Contractor’s License 44810
NABCEP Certified PV Installation Professional
---
On 2023-08-25 12:44, Eric Smiley via RE-wrenches wrote:
Interesting. Fronius has a strong presence in Canada with good tech support. We also have a very low failure rate - can't remember the last time we replaced one. There were some supply issues earlier this year but we are receiving inverters and parts. They also have a good rep for low failure and good service in Australia and Europe. Not sure why the US gets short shrift.
[https://viridianenergy.ca/sites/all/themes/viridian/emails/signature-line.png]
Eric Smiley, Design Manager
eric at vecoop.ca<mailto:eric at vecoop.ca>
T: 250.703.6004<tel:+12507036004>
T: 888.386.0116<tel:+18883860116>
VIRIDIANENERGY.CA<https://viridianenergy.ca/>
[https://viridianenergy.ca/sites/all/themes/viridian/emails/signature-footer.png]<https://viridianenergy.ca/>
On Fri, 25 Aug 2023 at 08:27, Dave Angelini Offgrid Solar via RE-wrenches <re-wrenches at lists.re-wrenches.org<mailto:re-wrenches at lists.re-wrenches.org>> wrote:
I think Fronius has left the building. The reason I know is they stopped sending me AFCI repairs about 2 years ago. There was not any support from their installers in remote places like the Sierra range.
I would second Tump on picking a good company with real money and products. Below is a new one this fall.
https://shop.se.com/us/en/schneiderhome
Dave Angelini Offgrid Solar
"we go where powerlines don't"
https://offgridsolar1.com/
e-mail offgridsolar at sti.net<mailto:offgridsolar at sti.net>
text 209 813 0060
On 2023-08-25 3:55 am, Tump via RE-wrenches wrote:
Mick, I would avoid trying to use a manufacture that has little NO support OR product availability.
IF your using the Schnieder Pros, I would suggest you consider the 600/100 CC. This product is more then capable of handling 7kW of input. They are available, compatible w/ their (Schnieder's) battery monitoring AND offer a system that is able to "talk" to itself.
Off grid should be uniform in design so clients/caretakers and you, have little adding to confusion IF/when their is an issue.
Lord knows Im not saying there won't be an issue w/ Schnieder's product, but we DO have a product, tech support & other persons w/in the company we are able to call on.
AC coupling, for off grid while we have Hi V CCs available is for me a thing of the past. My$0.02 worth TUMP
On Aug 24, 2023, at 4:23 PM, Mick Abraham via RE-wrenches <re-wrenches at lists.re-wrenches.org<mailto:re-wrenches at lists.re-wrenches.org>> wrote:
Hi, Mechanix~ I asked a Greentech location about quantity four Fronius string inverter PRIMO 6.0-1. (6kW AC output, single phase 240 volt 60 hz) This p/n is in the Greentech portal but my particular branch hasn't done much with Fronius. Today the branch manager told me "Fronius no longer exists."
Can any of you confirm or correct this report? I have an off-grid opportunity for which I wish to AC couple some of the PV. If Fronius USA has indeed "left the building", are there other string inverters that can be selected for country code "off grid 60 hz"? I'd like for the PV inverters to only curtail their output wattage if there's a frequency shift from the grid forming inverter (frequency/watt). Schneider XW Pro units would be forming the grid. Schneider has a white paper # 990-6421 on AC coupling but this document is almost three years old & no help at all in finding compatible PV inverters. Rapid shutdown is not mandated for this gig & each array would be evenly illuminated. IIRC, the List hasn't been highly enamored with SolarEdge in recent years; is that still the consensus?
Thanks as always; the Wrench List is the Bomb!
Mick Abraham, Proprietor
www.abrahamsolar.com<http://www.abrahamsolar.com/>
Landline: 970-731-4675
Cell phone or for text messaging: 970-946-6584
[cid:169357652564f1ed4d32118273947807 at redwoodalliance.org]ᐧ
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
Tump<./#NOP>3391 at gmail.com<mailto:3391 at gmail.com> www.SWNL.net<./#NOP>
Solarwinds Northernlights
Serving Mid Coast Maine & Northern California
207-832-7574 Cl. 610-517-8401
Blair "TUMP" May
******** MAINE'S CHARTER ********
NABCEP "Certified PV Installer"
******** MAINE'S CHARTER ********
Trace Xantrex "Certified" Dealer / Installer"
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
_______________________________________________
List sponsored by Redwood Alliance
Pay optional member dues here: http://re-wrenches.org
List Address: RE-wrenches at lists.re-wrenches.org<mailto:RE-wrenches at lists.re-wrenches.org>
Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
There are two list archives for searching. When one doesn't work, try the other:
https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
List rules & etiquette:
http://www.re-wrenches.org/etiquette.htm
Check out or update participant bios:
http://www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230901/2d500610/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: blocked.gif
Type: image/gif
Size: 118 bytes
Desc: blocked.gif
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230901/2d500610/attachment.gif>
More information about the RE-wrenches
mailing list