[RE-wrenches] Snapnrack end caps
Garrison
garrison.rie at gmail.com
Wed Jul 5 15:25:14 PDT 2023
Hi Drake,
I can confirm. The design could be improved.
I’ve noticed that end caps on rails that are flush or a fraction of an inch shorter than the panel frame lose the end caps at a higher rate than when the rail sticks past the module frame. My guess is that module movement from expansion/contraction is popping them off.
Best,
Garrison Riegel
Celestar Solar LLC
> On Jul 5, 2023, at 3:51 PM, Drake Chamberlin via RE-wrenches <re-wrenches at lists.re-wrenches.org> wrote:
>
>
> Hello All,
>
> We have had a lot of end caps fall off Snapnrack Ultra Rail. Kevin at S&R was wondering if this is a common occurrence. Is it something we are doing, is it freezing and thawing or is it the design of the caps.
>
> Thank you,
>
> Drake
>
> Drake Chamberlin
>
> Athens Electric LLC
>
> Ohio Electrical Contractor’s License 44810
>
> CO Master Electrician’s License 4526
>
> NABCEP Certified PV Installation Professional
>
> --
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230705/8d1c3251/attachment.htm>
More information about the RE-wrenches
mailing list