[RE-wrenches] Parallel Homegrid Stack'd Busbar

[Jason Szumlanski]

Thanks, Mac. However, I am also paralleling two Sol-Ark 15k. Since each
battery only accepts a single cable lug I believe, I need to make a splice
somewhere.

Jason Szumlanski
Principal Solar Designer | Florida Solar Design Group
NABCEP Certified Solar Professional (PVIP)
Florida State Certified Solar Contractor CVC56956


On Thu, Jun 29, 2023 at 8:28 AM Mac Lewis via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> Hi Jason,
>
> The Sol-Ark 15k has dual battery input terminals so they can be combined
> right inside.  This could be a good option to consider.
>
> Thanks
>
>
> On Thu, Jun 29, 2023 at 6:17 AM Maverick Brown via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> I recommend the Victron Lynx Power In or the Lynx Distributor.
>>
>> Thank you,
>>
>> Maverick
>>
>>
>> On Jun 29, 2023, at 6:55 AM, Jason Szumlanski via RE-wrenches <
>> re-wrenches at lists.re-wrenches.org> wrote:
>>
>> 
>> Hi all,
>>
>> I'm doing my first installation with two 24 kWh Homegrid stacks. They
>> will feed two Sol-Ark 15k. I'm seeking recommendations on busbars for
>> connecting this up in the most elegant way possible.
>>
>> Pictures speak 1,000 words, so if you have any I would appreciate it
>> (off-list is fine).
>>
>> Jason Szumlanski
>> Florida Solar Design Group
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230629/845a7343/attachment.htm>