[RE-wrenches] Truss finder

Christopher Warfel cwarfel at entech-engineering.com
Mon Apr 17 13:13:03 PDT 2023


There are very good roof mounting systems that do not require finding 
the rafter. There was a thread on this within the past two weeks.  I 
understand the comfort of lagging into a rafter, but unless you can see 
the rafters from below, you'll never know 100% you did not come out the 
side of the rafter, especially if the rafter is checked. We use the 
hammer, two pilot holes to establish the rafter edge if we are attaching 
to the rafter. That is a cool tool though that I never saw before.  Chris

On 4/17/2023 3:31 PM, Garrison via RE-wrenches wrote:
> Hi Kris,
>
> I started using the Bosch D-tect 150 a few years ago after a friend 
> who had success with it recommended it.  Works great on most roofs.  
> It needs a smooth surface to roll on so I use a piece of Soladeck 
> box.  Older roofs with ply over roof boards don't scan very well so I 
> sometimes go back to the mallet method.
>
> I also highly recommend the Chip Tool!  Every installer should have 
> one.  It's best use in my opinion is for installing fall protection.  
> I don't recommend it be used with a "micro flashing" though, as the 
> pilot hole next to the rafter may only be barely covered by the 
> "flashing".
>
> Best,
>
> Garrison Riegel
> Licensed Electrician
> NABCEP Certified PV Installation Professional™
>
> (c) 773-515-5168  (e) garrison at celestarsolar.com
>
>
> On Sun, Apr 16, 2023 at 10:13 AM Kristopher Schmid via RE-wrenches 
> <re-wrenches at lists.re-wrenches.org> wrote:
>
>     I am considering buying a deep scanner for locating trusses.  Any
>     recommendations or testimonials?
>
>     Shine On!
>
>     Kris Schmid
>     Legacy Solar, LLC
>     137 West 1st Avenue
>     Luck, WI 54853
>     www.legacysolar.com <http://www.legacysolar.com>
>     715-653-4295
>     NABCEP Certified PV Installation Professional
>     Licensed Wisconsin Master Electrician
>     BSEE
>     _______________________________________________
>     List sponsored by Redwood Alliance
>
>     Pay optional member dues here: http://re-wrenches.org
>
>     List Address: RE-wrenches at lists.re-wrenches.org
>
>     Change listserver email address & settings:
>     http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>     There are two list archives for searching. When one doesn't work,
>     try the other:
>     https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>     http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
>     List rules & etiquette:
>     http://www.re-wrenches.org/etiquette.htm
>
>     Check out or update participant bios:
>     http://www.members.re-wrenches.org
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here:http://re-wrenches.org
>
> List Address:RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
-- 
             Christopher Warfel
                      ENTECH Engineering, Inc.
PO Box 871, Block Island, RI 02807
                                 401-466-8978
<http://entech-engineering.com>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230417/4078cc7f/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: EEIlogolong.jpg
Type: image/jpeg
Size: 17117 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230417/4078cc7f/attachment.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cwarfel.vcf
Type: text/vcard
Size: 203 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20230417/4078cc7f/attachment.vcf>


More information about the RE-wrenches mailing list