[RE-wrenches] Old Trace SW inverter connected to the grid.

[Steve Higgins]

Great Point, Todd... Todd is correct. Wire the Utility to the AC2 Input
(Generator), and it won't be able to sell at all.

Steve Higgins.




On Mon, Dec 19, 2022 at 8:14 AM Todd Cory via RE-wrenches <
re-wrenches at lists.re-wrenches.org> wrote:

> If the grid is wired to AC2, then the inverter can charge off off that
> source but not sell to it.
>
> Todd
>
>
>
>
>
>
>
> On Monday, December 19, 2022 7:50am, "Tump via RE-wrenches" <
> re-wrenches at lists.re-wrenches.org> said:
>
> I have neve heard that but I would connect the utility to the AC1 input as
> the window is quite narrow then the grid. The GTI was a piss poor way for
> trace to regulate “sell” current would ramp up & back down all day long.
> NOT necessary. BUT then again that old duffer; SH  probably has more brain
> cells left then I do.
>
> On Dec 19, 2022, at 10:27 AM, Chad Waits via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
> I thought the SW needed a Grid Tie Interface (GTI)
> <https://www.altestore.com/store/media/pdfs/xantrex/Grid%20Tie%20Interface%20(GTI)%20Data%20Sheet.pdf>
> to keep current from leaking out to the grid even if you didn;t want to
> sell to them...
> Chad Waits
> President - Net Zero Solar
> 945 W. Silverlake, Tucson, AZ 85713
> Cell: (520) 270-4873
>
> On Mon, Dec 19, 2022 at 8:21 AM David Palumbo via RE-wrenches <
> re-wrenches at lists.re-wrenches.org> wrote:
>
>> Wrenches,
>>
>>
>>
>> I have been retired from doing solar installs for 10 years now and I am
>> reaching out for help as to recommending a solution to an old
>> do-it-yourself customers question.
>>
>> His solar system that was formerly off-grid and is now using grid power
>> instead of a back up generator.
>>
>> He had/has no intention of doing a net-metered system. Just trying to
>> reduce dependance on a fossil fuel genset during our mostly sunless Vermont
>> winters.
>>
>>
>>
>> He says that he brought in power a few years ago to run their expanding
>> maple sugaring operation located next to their house. At that time they ran
>> a 115Vac circuit (grid power) over to their house and connected grid power
>> into AC Hot In terminal #! in their Trace SW 2512. This is correct as I see
>> terminal #2 is labeled for generator power.
>>
>> He has the Trace programmed for float mode  not sell mode.
>>
>>
>>
>> Their local utility was working on the line nearby on the main road and
>> noticed a small amount of current flowing into the grid and figured out
>> where it was coming from. The utility did not immediately shut him down.
>> Just told him to correct the problem. He is asking me for advice.
>>
>>
>>
>> My first inclination is to separate the grid power completely from the
>> inverter power and to feed both power sources into a double pole double
>> throw transfer switch. What other options should be considered.
>>
>>
>>
>> Thanks in advance and happy holidays,
>>
>>
>>
>> Dave Palumbo
>>
>> Formerly > Independent Power & Light
>>
>> Hyde Park, VT
>>
>> 802-371-8678 voice or text
>>
>>
>>
>>
>> _______________________________________________
>> List sponsored by Redwood Alliance
>>
>> Pay optional member dues here: http://re-wrenches.org
>>
>> List Address: RE-wrenches at lists.re-wrenches.org
>>
>> Change listserver email address & settings:
>> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>>
>> There are two list archives for searching. When one doesn't work, try the
>> other:
>> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
>> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>>
>> List rules & etiquette:
>> http://www.re-wrenches.org/etiquette.htm
>>
>> Check out or update participant bios:
>> http://www.members.re-wrenches.org
>>
>> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
> *Tump3391 at gmail.com <3391 at gmail.com>*       *www.SWNL.net*
>                 Solarwinds Northernlights
> *       Serving Mid Coast Maine & Northern California*
> *                         207-832-7574   Cl.
> 610-517-8401                              *
>                               *Blair "TUMP" May*
>
>
> *               ********  MAINE'S CHARTER ******** *                   *
> NABCEP    "Certified PV Installer"*
>
>
> *                 ********  MAINE'S CHARTER ********          **
> Trace Xantrex "Certified" Dealer / Installer"*
>
>
>
>
> Sent from Finest Planet WebMail.
> _______________________________________________
> List sponsored by Redwood Alliance
>
> Pay optional member dues here: http://re-wrenches.org
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> There are two list archives for searching. When one doesn't work, try the
> other:
> https://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/
> http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org
>
> List rules & etiquette:
> http://www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> http://www.members.re-wrenches.org
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20221219/55395a63/attachment.htm>