[RE-wrenches] Elithion BMS
Starlight Solar Power Systems
larry at starlightsolar.com
Fri Aug 25 10:04:31 PDT 2017
Right… I would not recommend this “home-brew” product for any client. If you are a DIY person and are sure you understand the risks of hacking a Tesla battery system, that is a jewel of a controller. However, when things go wrong because you were lazy, cheap or stupid, it can be bad…. very bad.
Larry
On Aug 25, 2017, at 9:19 AM, Dave Angelini Offgrid Solar <offgridsolar at sti.net> wrote:
That was nice Larry,
I just can't imagine that in a clients offgrid home. Homebrew is for beer
offgrid:) Friday!!
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridsolar at sti.net
text 209 813 0060
Dave Starlight Solar Power SystemsDave
> Hi Jay,
>
> No, but if your working with Tesla battery modules have you seen the
> battery control interface that Jack Rickard built? It uses the Tesla EMS
> and can monitor up to 62 Tesla battery modules. Itâs programmable and
> has output contacts for PV solar controllers and other devices.
> See http://store.evtv.me/proddetail.php?prod=modulecontroller
>
> Larry Crutcher
> Starlight Solar Power Systems
>
>
> On Aug 24, 2017, at 8:28 AM, jay <jay.peltz at gmail.com> wrote:
>
> Does anyone know anything about Elithion BMS systems?
>
> Or had experience with them?
>
> Would be used for control on tesla salvage batteries, to control
> upper/lower voltage safety relays.
>
> thanks in advance,
>
> jay
>
> peltz power
>
>
Dave Angelini Offgrid Solar
"we go where powerlines don't"
http://members.sti.net/offgridsolar/
e-mail offgridsolar at sti.net
text 209 813 0060
More information about the RE-wrenches
mailing list