[RE-wrenches] OutBack FX Internal Fan running 24/7

[Tom Ruscitti]

We had a similar issue last year on two new systems with FXR3048A 
inverters. An Outback tech proposed the solution below and .... it 
mysteriously worked. Not sure if this applies to older FX inverters or 
only the newer FXRA with latest firmware.

•    Make sure master is in HUB port 1 and sub-phase master in port 7. 
If not, various errors can show up including random inverter fan running 
continuously.

- Tom

-- 
Tom Ruscitti
Senior Engineer

Taitem Engineering, PC
110 S. Albany Street, Ithaca, NY 14850
Mobile: (607) 220-7022
www.taitem.com