[RE-wrenches] anything like Generac Smart Management Module for a solar critical backup panel

[Howard Arey]

Hello again, wrenches.

 

I know many of us have run into the quandary and that is  prioritizing loads
in a critical load panel.

 

About to put in some LG RESU units with the SE7600 StorEdge and the 21 amps
continuous is pretty tough.

 

But with some smart, automated load management, this can work just fine.

 

Is there anything like the Generac SMM
(http://www.generac.com/all-products/transfer-switches/home-backup) out
there that does not depend on decreasing cycles/hz to recognize its bumping
into max load conditions?

 

Howard "Scot" Arey

254-300-1228

scot.arey at solarcentex.com <mailto:scot.arey at solarcentex.com> 

 



 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170829/d6f923d9/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 48492 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20170829/d6f923d9/attachment-0003.png>