[RE-wrenches] #6 PV Wire Transition

[penobscotsolar at midmaine.com]

This is what I would use, Corey.

http://www.elecdirect.com/lug-compression-connectors/insulated-power-connectors/insulated-powerbar-4-14sol-single-sided-entry-3-conductors-clear?gclid=CIaN4KHKyM8CFURbhgodTlwGxA


Daryl



> We're looking for a way to transition from #6 PV wire to #8/#10 PV wire
> wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a
> #6-compatible MC4 connector. Has anyone else had to deal with this? or has
> any creative solutions?
>
> --
> Corey Shalanski
> Joule Energy
> New Orleans, LA
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>