[RE-wrenches] #6 PV Wire Transition

Chris Mason cometenergysystems at gmail.com
Fri Oct 7 04:24:29 PDT 2016


Waterproof enclosure, cable glands, DIN rail, DIN terminals, jumpers. Fuse
if applicable. Build to suit your needs.

On Thu, Oct 6, 2016 at 8:10 PM, Allan Sindelar <allan at sindelarsolar.com>
wrote:

> Corey,
> The Ilsco would work, but they're quite expensive and aren't likely rated
> for exposure to weather.
> While I don't have a solution, Brian or staff at PV Cables may if anyone
> does. 707 923-3000, www.pv-cables.com
> Allan
>
> *Allan Sindelar*
> allan at sindelarsolar.com
> NABCEP Certified PV Installation Professional
> NABCEP Certified Technical Sales Professional
> New Mexico EE98J Journeyman Electrician
> Founder (Retired), Positive Energy, Inc.
> *505 780-2738 <505%20780-2738> cell*
>
>
> On 10/6/2016 5:23 PM, Benn Kilburn wrote:
>
> Could you use one of those insulated Ilsco terminal blocks (sorry, don't have a part number handy) to transition the #6 to short length of #8/10 then put your #8/10 connector on the short piece?
>
> Benn Kilburn
> SkyFire Energy Inc. 780-906-7807
>
> On Oct 6, 2016, at 4:22 PM, Corey Shalanski <corey at joule-energy.com> <corey at joule-energy.com> wrote:
>
> We're looking for a way to transition from #6 PV wire to #8/#10 PV wire wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a #6-compatible MC4 connector. Has anyone else had to deal with this? or has any creative solutions?
>
> --
> Corey Shalanski
> Joule Energy
> New Orleans, LA
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:www.members.re-wrenches.org
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:www.members.re-wrenches.org
>
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.
> org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>


-- 
Chris Mason
NABCEP Certified Solar PV Installer™
Solar Design Engineer
Generac Generators Industrial technician

www.cometsolar.com <http://www.cometenergysystems.com>
264.235.5670
869.662.5670
Skype: netconcepts
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20161007/b3665253/attachment-0002.html>


More information about the RE-wrenches mailing list