[RE-wrenches] #6 PV Wire Transition
Benn Kilburn
benn at skyfireenergy.com
Thu Oct 6 16:23:22 PDT 2016
Could you use one of those insulated Ilsco terminal blocks (sorry, don't have a part number handy) to transition the #6 to short length of #8/10 then put your #8/10 connector on the short piece?
Benn Kilburn
SkyFire Energy Inc.
780-906-7807
> On Oct 6, 2016, at 4:22 PM, Corey Shalanski <corey at joule-energy.com> wrote:
>
> We're looking for a way to transition from #6 PV wire to #8/#10 PV wire wye-harnesses. Unfortunately Multi-Contact doesn't seem to manufacture a #6-compatible MC4 connector. Has anyone else had to deal with this? or has any creative solutions?
>
> --
> Corey Shalanski
> Joule Energy
> New Orleans, LA
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
More information about the RE-wrenches
mailing list