[RE-wrenches] Sub Panel Mounted on Roof Slope

[Ryan Mayfield]

Bentek has a product listed on their site that may fit the bill, although there isn’t much in the way of documentation: http://www.bentek.com/solar-products/disconnect-systems/ac-powerbuss/ 

 

Ryan

 

 

 

From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Chris Mason
Sent: Thursday, September 29, 2016 1:12 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Sub Panel Mounted on Roof Slope

 

Specify NEMA12.

 

On Sep 27, 2016 19:30, "Dana Brandt" <dana at ecotechenergy.com <mailto:dana at ecotechenergy.com> > wrote:

Hi Wrenches,

 

Does anyone know of a 480VAC panelboard that can be mounted flush to a 10 degree pitched roof as opposed to vertically? 

 

Thanks,




Dana

Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com <http://www.ecotechenergy.com> 
dana at ecotechenergy.com <mailto:dana at ecotechenergy.com> 
360.318.7646 <tel:360.318.7646> 


_______________________________________________
List sponsored by Redwood Alliance

List Address: RE-wrenches at lists.re-wrenches.org <mailto:RE-wrenches at lists.re-wrenches.org> 

Change listserver email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org

List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html

List rules & etiquette:
www.re-wrenches.org/etiquette.htm <http://www.re-wrenches.org/etiquette.htm> 

Check out or update participant bios:
www.members.re-wrenches.org <http://www.members.re-wrenches.org> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160929/b9ec1c30/attachment-0002.html>