[RE-wrenches] Sub Panel Mounted on Roof Slope

[Dana Brandt]

Thanks, Kirk. I understand that if a panel isn't list for other than
vertical mounting we can't lay it down. I was hoping a wrench may know of a
panel that *is* listed for other than vertical mounting.

Dana

Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646


On Wed, Sep 28, 2016 at 2:15 PM, Kirk Herander <vtsolar at icloud.com> wrote:

> Correction: I meant “other than vertical” in last email, not horizontal.
>
>
>
> *From:* RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] *On
> Behalf Of *Dana Brandt
> *Sent:* Tuesday, September 27, 2016 7:30 PM
> *To:* RE-wrenches
> *Subject:* [RE-wrenches] Sub Panel Mounted on Roof Slope
>
>
>
> Hi Wrenches,
>
>
>
> Does anyone know of a 480VAC panelboard that can be mounted flush to a 10
> degree pitched roof as opposed to vertically?
>
>
>
> Thanks,
>
>
> Dana
>
> Dana Brandt
> Ecotech Energy Systems, LLC
> www.ecotechenergy.com
> dana at ecotechenergy.com
> 360.318.7646
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.or
> g/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160929/f4f8f717/attachment-0002.html>