[RE-wrenches] Sub Panel Mounted on Roof Slope

[Kirk Herander]

Boxes, etc, if allowed to mounted other than horizontal, are specifically listed as mountable to a certain angle. If it’s not listed to 10 degrees, then no.

 

From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On Behalf Of Dana Brandt
Sent: Tuesday, September 27, 2016 7:30 PM
To: RE-wrenches
Subject: [RE-wrenches] Sub Panel Mounted on Roof Slope

 

Hi Wrenches,

 

Does anyone know of a 480VAC panelboard that can be mounted flush to a 10 degree pitched roof as opposed to vertically? 

 

Thanks,




Dana

Dana Brandt
Ecotech Energy Systems, LLC
www.ecotechenergy.com
dana at ecotechenergy.com
360.318.7646

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160928/a26a0b58/attachment-0002.html>