[RE-wrenches] Grid tie with dump load?

[jay]

Hi Kris,

yes I think you need to help us with greater information about what the reasons are, and the specific requirements.

1. instantaneous or monthly?
2. does it have to be listed and approved?
3. is this utility requirement or customers fancy?
4. anything else?

thanks
jay
peltz power

> On Sep 7, 2016, at 11:31 AM, Kristopher Schmid <solman at legacysolar.com> wrote:
> 
> REWs,
> 
> I have a client that asked me if i can install a battery free grid tied system and have a dump load activate when it is overproducing.  I am at a loss, here.  Anyone have ideas?  A CT on the line side that would activate a relay while current is flowing to the utility?
> 
> Thanks,
> Kris
> 
> -- 
> Shine On!
> 
> Kris Schmid
> Legacy Solar, LLC
> 864 Clam Falls Trail
> Frederic, WI 54837
> www.legacysolar.com <http://www.legacysolar.com/>
> 715-653-4295
> NABCEP Certified PV Installer
> Licensed Wisconsin Master Electrician
> BSEE
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160907/2fb98b35/attachment-0002.html>