[RE-wrenches] Steel Trusses
Chad Waits
chadwaits at netzerosolar.net
Tue Jun 7 04:51:53 PDT 2016
Thanks for the input gentlemen (and ladies if applicable).
Chad Waits
President/Owner Net Zero Solar
101 W. 5th St., Tucson, AZ 85705
Office: 520-207-4053
Cell: 520-270-4873
NABCEP Certified PV Installation Professional
NABCEP Certified Solar Heating Installer
From: RE-wrenches <re-wrenches-bounces at lists.re-wrenches.org> on behalf of
Tom Duffy <Tom at solar-biz.com>
Reply-To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Date: Monday, June 6, 2016 at 4:03 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: Re: [RE-wrenches] Steel Trusses
Hey Chad
E-Jot Makes a fastener for steel that¹s thread cutting (must be pre drilled)
It also has a neoprene washer and stainless hardware.
Kind regards
Tom Duffy
Senior Solar Design Engineer
E-Mail: tom at solar-biz.com
**Please note my new email You will now be able to find me at:
tom at solar-biz.com Please update your records so we don¹t lose touch!**
Main Number: 888-826-0939
Panama Office: 507-836-5588 X 122
Direct Toll Free:888-503-6772
International: 575-539-2111 X 122
SKYPE Address: thesolarbiz (e-mail first)
NOTICE: Due to recent budget cuts, the rising cost of electricity, gas, and
oil...plus the current state of the economy............the light at the end
of the tunnel, has been turned off It should have been solar.
Confidentiality Notice: This message including any attachments is for the
sole use of the intended recipient and may contain confidential and
privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender and delete any copies of this message.
From: RE-wrenches [mailto:re-wrenches-bounces at lists.re-wrenches.org] On
Behalf Of Chad Waits
Sent: Monday, June 06, 2016 5:15 PM
To: RE-wrenches <re-wrenches at lists.re-wrenches.org>
Subject: [RE-wrenches] Steel Trusses
Wrenches,
Anyone out there have any experience attaching arrays (from the topside) to
roofs with steel trusses under plywood decking? We¹ve got a new project that
has steel trusses and we would prefer to not have to spend time in the attic
bolting through (it was 113 degrees here today) Is there a fastening
system out there that anyone has experience with?
Oh, the roof is composite/strengthened clay tile as well.
Thanks!
Chad Waits
President/Owner Net Zero Solar
101 W. 5th St., Tucson, AZ 85705
Office: 520-207-4053
Cell: 520-270-4873
NABCEP Certified PV Installation Professional
NABCEP Certified Solar Heating Installer
_______________________________________________ List sponsored by Redwood
Alliance List Address: RE-wrenches at lists.re-wrenches.org Change listserver
email address & settings:
http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
List-Archive:
http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or
update participant bios: www.members.re-wrenches.org
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160607/96471e82/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 21245 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160607/96471e82/attachment-0012.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 17364 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160607/96471e82/attachment-0013.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Transparent-Logo Signature[1][34].png
Type: image/png
Size: 21245 bytes
Desc: not available
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160607/96471e82/attachment-0014.png>
More information about the RE-wrenches
mailing list