[RE-wrenches] Metal Battery Box

[Ken Schaal]

Corrected email address..message below
On May 31, 2016 1:56 PM, "Ken Schaal" <cwsolar1 at gmail.com> wrote:

> For years we've used site built, cement board boxes. ..like Hardy board or
> Durock.
> For insulated box, use EPS foam and line with cement board.
> Ken Schaal Commonwealthsolar.com
> Hi All,
>
> We have a local inspector who is asking us to use metal battery boxes
> instead of plastic.
>
> Ideally something that is UL-listed if that even exists, but we were able
> to push back on that.
>
> Does anyone have any recommendations for a metal battery box that will
> hold 8 or 16 L16 FLA batteries?
>
> Thanks,
> Dave
>
> *--*
>
>
> *Dave Tedeyan*
> *Project Engineer*
>
> *Taitem Engineering, PC*
> 109 S. Albany Street, Ithaca, NY 14850
> Voice: (607) 277-1118 x121
> www.taitem.com
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160531/4702e321/attachment-0002.html>