[RE-wrenches] Goofy roofing

[Chris Mason]

I would use Everest Express rail pop riveted to every trapezoid, it will
add a lot of strength to the roofing. You may not bee able to get it any
more though.
On Apr 29, 2016 09:54, "frenergy" <frenergy at psln.com> wrote:

> Recently, a customer had a metal roof (not standing seam) installed by a
> "handyman".  Pretty clean installation however for some reason he ran 1X6
> stringers across the roof  on the 1/2" plywood deck spaced about every 4
> feet (as you go from ridge to eaves).  Of course the roofing screws are at
> the stringers.  I'm sure he had a *great* reason for doing so.  So now I
> have been asked to install an array on this roof.  You can feel how "soft"
> the roof is as you walk on it of course because you are walking on
> air-below-metal for most of the roof.  Stringer locations don't jive with
> possible feet/post locations for rail.  I'm usually pretty good at problem
> solving but I'm accepting ideas.
>
> Bill
>
> Feather River Solar Electric
> Bill Battagin, Owner
> 4291 Nelson St.
> Taylorsville, CA 95983530.284.7849
> CA Lic 874049www.frenergy.net
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160429/5fff2020/attachment-0002.html>