[RE-wrenches] 1000V rated 6AWG wire

[Matt Partymiller]

The cheapest solution I have been able to find for this over the past 12
months has been PV wire. The other problem you might find is 1000V listed
components to transition from PV wire to other types of wire.

Matt


On Thu, January 28, 2016 7:48 am, Kirpal Khalsa wrote:
> Hello Friends!
> I am looking for 1000v rated #6awg wire suitable for running in conduit
> from roof top combiner down to the inverter....what are others using for
> this application? Ideally I would love to find some THHN or THWN-2 but
> with 1000v rating....any suggestions, sources?
> Application is from a SolarEdge commercial optimizers based array which
> puts out 850VDC.... Thank you!
> _______________________________________________
> List sponsored by Redwood Alliance
>
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.ht
> ml
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>


Matthew Partymiller
Solar Energy Solutions LLC
(877) 312-7456
matt at solar-energy-solutions.com