[RE-wrenches] Battery corrosion issue

[frenergy]

I wonder if by the rounded shape of the flag, Todd's idea might work 
fine with still a significant amount of contact area.


On 1/20/2016 2:02 PM, toddcory at finestplanet.com wrote:
>
> whoops, was that a flag terminal? i looked at it wrong and thought it 
> was a post terminal.
>
> todd
>
>
>
> On Wednesday, January 20, 2016 2:01pm, toddcory at finestplanet.com said:
>
>
>
> On Wednesday, January 20, 2016 1:53pm, "Kristopher Schmid" 
> <solman at legacysolar.com> said:
>
> Greetings,
>
> Do any of you battery gurus have a suggestion for a method of removing 
> a bolt remnant that is corroded into a flag terminal.  Both sides 
> snapped off flush with the flag.  I was thinking try to drill it out 
> or maybe a small gear pulling tool?  I will never again use the non 
> stainless hardware supplied by the manufacturer...
>
> Picture attached for reference.
>
> Thanks!
>
>
>
>
> Sent from Finest Planet WebMail.
>
>
>
> Sent from Finest Planet WebMail.
>
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160121/9a419c77/attachment-0002.html>