[RE-wrenches] Battery corrosion issue

[Roy Rakobitsch]

Yup, id pre-drill and use an ez-out, or use a flaring tool as a small press
and drive it out.

RoyR
On Jan 20, 2016 3:54 PM, "Kristopher Schmid" <solman at legacysolar.com> wrote:

> Greetings,
>
> Do any of you battery gurus have a suggestion for a method of removing a
> bolt remnant that is corroded into a flag terminal.  Both sides snapped off
> flush with the flag.  I was thinking try to drill it out or maybe a small
> gear pulling tool?  I will never again use the non stainless hardware
> supplied by the manufacturer...
>
> Picture attached for reference.
>
> Thanks!
>
> _______________________________________________
> List sponsored by Redwood Alliance
>
> List Address: RE-wrenches at lists.re-wrenches.org
>
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
>
> List-Archive:
> http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
>
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
>
> Check out or update participant bios:
> www.members.re-wrenches.org
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.re-wrenches.org/pipermail/re-wrenches-re-wrenches.org/attachments/20160120/1ad8df05/attachment-0002.html>