[RE-wrenches] Radian vs SI - Shunt for SOC Control

[Jay]

Hi mark,

Yes the radian doesn't have an integral shunt. 
All that information is via external shunts ( 1-3 shunts) and the FNDC

Jay
Peltz power. 

> On Jan 16, 2016, at 9:34 AM, Mark Frye <markf at berkeleysolar.com> wrote:
> 
> Folks,
> 
> I know with both the Radian and the SI you can use an external shunt to support the measurement of KWH and support various SOC controls.
> 
> But what happens if you don't use an external shunt?
> 
> I am pretty sure that the Radian does not have an internal shunt to support SOC control.
> 
> What about with the SI? Does it implement it's SOC controls even without an external shunt?
> 
> Thanks,
> 
> Mark Frye
> Berkeley Solar Electric Systems
> 
> 
> _______________________________________________
> List sponsored by Redwood Alliance
> 
> List Address: RE-wrenches at lists.re-wrenches.org
> 
> Change listserver email address & settings:
> http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org
> 
> List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html
> 
> List rules & etiquette:
> www.re-wrenches.org/etiquette.htm
> 
> Check out or update participant bios:
> www.members.re-wrenches.org
>